Portable Amplifier PR-102 BD

Portable Amplifier  PR-102 BD
==============================
◆Output: 10 inch 2 channel built-in speaker: OUT1+OUT2; when OUT1 insert, parallel connected with the build-in speaker, OUT2 insert, cut with the built-in speaker.
AUX OUT*1 .
LINE OUT*1.
◆Input:
wireless MIC*2 .
CD*1 ;
TAPE*1 .
AUX IN*1 .
LINE IN *1 .
with two group of BAL and UNBAL Dual purpose wire microphone.
◆FUNCTION
◆The Portable Amplifier with handle, completed functions.
◆Made of high quality aluminum material, portable and well carry-home.
◆With simple sculpt, linetype flute design.
◆Microphone with bass and treble, echo、repeat and delay functions.
◆With power switch , convenient for several amplifiers in series.
◆Build inside one group 24V/4.2AH battery, can be used when power failure.
◆Built-in high quality digital echo circuit and actuator, can make Singing/speaking voice more beautiful.
◆Built-in priority power switch, after start, all microphones have priority speak function.
◆Microphone with Sing/Speak power switch, is suitable for different occasions.
◆With intellective battery charge management function, can check battery, if in low it can cut automatically to prevent over discharging.
◆With flex pole、handle、wheel and triangle rack fixed point, convenient for moving and installing.
◆Microphone with Sing/Speak power switch, is suitable for different occasions.
◆With intellective battery charge management function, can check battery, if in low it can cut automatically to prevent over discharging. 

MODEL
 PR-102BD
 
WIRELESS MIC FREQUENCY
 UHF 700~870MHz, 16 CH Optional
 
FREQUENCY  RESPONSE
 40Hz～20KHz
 
RATEDD POWER OUTPUT
 AC220V/ 110V 100W     DC 70W
 
BATTERY
 12V/4.2AH×2
 
POWER SOURCE
 AC 220V，DC24V(OUT,IN)
 
PEAK POWER
 210W
 
DIMENSIONS
 363W×287D×530H( mm)
 
NET WEIGHT
 19.5kg
 

Wireless Specification:
 1.      Comprehensive Performance

Carrier Frequency
 UHF790-870MHz
 
Frequency Stabilization
 ＜±30ppm
 
Dynamic Range
 ＞90dB
 
Total Harmonic Distortion
 ＜0.5%
 
Frequency Response
 40HZ-15KHZ±3dB
 
Audio Output Level
 SEPARATE TYPE:0±400mV              MIX TYPE: 0±200mV
 

 2.      UHF Receiver      

Model
 WU-1601
 
Power Supply
 DC12V
 
Consume Power
 1.3WATER
 
Signal/Noise Ratio
 ＞90dB
 
Image & Spurious Rejection
 ＞80dB
 
Border Upon Channel Rejection
 ＞80dB
 
Receiving Sensitivity
 10dBu (SINAD﹦20dB)
 
DE-EMPHASIS
 50Us
 
Net Weight
 0.12 kg
 

 3. UHF Handhold Transmitter

Model
 WU-1601T
 
Transmitter Power
 8.5mW
 
Modulation Type
 FM,F3F
 
Max Deviation
 ±25HKz
 
Spurious Emission
 ＞40dB
 
Battery Voltage
 3V
 
Continous Using
 6hours
 
Net Weight
 0.23kg
 

 4. UHF Beltpack Transmitter w/ Tie-clip MIC

Model
 WU-1601H/ WU-1601M
 
Transmitter Power
 8.5mW
 
Modulation Type
 FM,F3F
 
Max Deviation
 ±25HKz
 
Spurious Emission
 ＞40dB
 
Battery Voltage
 3V
 
Continous Using
 6hours
 
Net Weight
 0.11kg /0.12 kg
 
=====================================